Oct 1st. 2008

This is a project from an excellent technician, Erwin Wiesbauer.  It is untested though.

Let me know if you are interested in updates, I can allways check with Erwin. 

From Erwin's schematic I have derived an AD1 version with C3g.  Let me know if you
are interested, I can email the drawings to you. 


********************** ABOUT THE USE OF THE S-PLAN SOFTWARE *****************

For viewing the schematic with original software, you can install the viewer on your PC.  The viewer is 
the full version, only it can not print, and can not save changes.  So it's really only a viewer. Since I have
the fullversion, I can make a printable copy, which is added too. 

An interesting way to print it,  is use the S-Plan software and make a screen shot. 

1) First open the graphics program you want to use for it. So corel draw, or photoshop,
or whatever you have. MSWORD is also very nice for it. So you have to open the grapics program, 
and START WITH AN EMPTY DRAWING, OR EMPTY MSWORD PAGE. So start a new sheet, as if you can add
text or lines to it.  Leave it open this way.

2) Now, go to S-PLAN and make the schematic visible on your screen.  Move it, and make it smaller 
until you have it on your screen the way you to make a "photo" of it.

3) Now press at the same time (together) The "Control" + "print" buttons on your keyboard.  ("Control" is called
different in local languages, like "strg"  in German, but it is the bottem left button on your keyboard)  

After you did so,  the screen shot is in the Windows memory now.   Don't do anything else as the
next instruction, or you might loose the picture from memory again.

4) Go back to your graphics program (the new page you started), touch the page empty page with
your mouse at the position where you want to photo (screen shot) inserted,  and then press
Control + v at the same time.   Now you see the screen shot! 
 

If this is the first time you do this, you will be much surprized about the nice results... You 
can copy ANYTHING from the screen this way, into almost ANY other program.   If you already knew it,
well so for the better ;)   

Note, you can not save changes,  so for that you need to buy S-PLAN latest Version. It costs
35 Euro and you can buy it via Paypal from the company that makes it.  It's a very nice program, 
I think it's worth the money. 

*****************************************************************************************************