EML 5U4G

About the Emission Labs tubes and how to use them.
Post Reply
gianni321
Posts: 1
Joined: Tue Aug 12, 2014 1:29 pm

EML 5U4G

Post by gianni321 »

Hi Everyone,

I would like to buy a pair EML 5U4G tube in my Cary SLI 80 amp. This tube is high (175mm) and wide (60mm). If I put in my amp the distance/gap between the two tubes is 2-3 mm. Is it enough for the safe operation?????

sameer
Posts: 1
Joined: Sat Nov 15, 2014 11:12 am

Re: EML 5U4G

Post by sameer »

The amplifier was designed in 3 blocs, two power blocs, with mainly the "big" triode, the 1020V power supply, the 10V (or 4V) filament supply, the output transformer, and a separate input/driver stage. The chosen output transformer was the F2013 from Tamura.

016hnoor
Posts: 1
Joined: Fri Mar 27, 2015 3:03 am

Re: EML 5U4G

Post by 016hnoor »

If I put in my amp the distance/gap between the two tubes is 2-3 mm.

Post Reply