Page 1 of 1

PP tube data

PostPosted: Fri Nov 23, 2018 10:06 pm
by archeus68
Does anyone have the 1605 tube data for Push Pull.
I think they only show SE tube data on the website.

Re: PP tube data

PostPosted: Sun Dec 30, 2018 2:51 pm
by J. Leven
Hi,
ich würde es so machen :
EML1605 PP amp
Arbeitspunkt : 520- 550 V , 110mA (pro Röhre), 70% autobias, 30% fix bias einstellbar, grid resistor to ground 100k, 5 V DC
Summit 6k6 with a small air cap for 10 mA unbalanced DC current