Build quality of L3-3

Brand name believed to be KALIBR.
Post Reply
Posts: 2
Joined: Wed Jan 25, 2017 6:08 pm

Build quality of L3-3

Post by wow001 »

Just arrived a NOS L3-3 manufactured in 1986, come with the wooden crate and small wooden box with tubes, cards, power cable, and two booklets.
The L3-3 is new but the top plate is very bent and wondered if this was transport damage or how they came from the factory?
IMG_2409.jpg (198.69 KiB) Viewed 4405 times
IMG_2404.jpg (225.7 KiB) Viewed 4404 times
There is some corner damage and the rotary switch used to calibrated the voltage will not rotate past number 9.
IMG_2395.jpg (236.51 KiB) Viewed 4404 times

User avatar
Posts: 15
Joined: Tue Aug 27, 2013 7:40 pm

Re: Build quality of L3-3

Post by Jac »

this is damage by post office monkeys. Or by the packaging monkey. Useually the combination.

Problem is now, the buyer is often the repair monkey. But you can have good results with a wooden hammer. No guarantee :)

Post Reply