HICKOK 600A Line Adjust

Hickok Electrical Instrument Co
Post Reply
VECHER
Posts: 1
Joined: Thu Jul 05, 2018 3:57 am

HICKOK 600A Line Adjust

Post by VECHER »

All, I cannot get the line adjust to go to the line adjust mark.. It only goes to about 1/2 way.. My line adjust pot is good..

Is there a adjustment to get it to go to the line adjust mark?

Also can some one tell me where the major parts are located under the chassis? EX: R1 . R2 Etc..

Skip

Post Reply